Beginners Guides
Renovating Kitchen Cabinets – What You Need to Know
If you are considering renovating your kitchen, there are several aspects to take into account. You must determine the expenses for installing new light fixtures and adding crown molding. Additionally, you should budget for refinishing or staining your cabinets. There are numerous choices available to customize the design and color of your kitchen cabinets.
Cost of installing new light fixtures
The cost of installing new light fixtures in kitchen cabinets renovations depends on how many you need, and what type of fixtures you choose. A single light can run from $25 to $125. Additional $75 to $425 can be charged for electrical work and parts. Some types of undercabinet lights, like light bars, can cost between $20 and $300. You can expect to pay between $265-$345 for a light fixture. However, the price can increase depending on the type of fixture you choose, the size of your kitchen, and the amount of electrical work required.
If you have an existing light fixture that can be connected to an existing wiring system, you don’t need to worry about obtaining a permit. However, if you’re adding new wiring, you may need a permit. The fee for a permit can add another $20 to $100 to the cost of the project. Another cost that you need to consider is the labor, which accounts for the majority of the cost. It will take anywhere from one to three hours to install new light fixtures. Most electricians have minimum fees, so it can save you money if you hire multiple electricians to work on the project at once.
Crown molding
Crown molding can transform your kitchen cabinets into elegant accents. It can transform a plain wooden box into something beautiful. Watch the video to learn how to install it. You will also find some helpful tips and tricks for installing crown molding.
Start by placing the crown molding at the end of the cabinets that are closest to the wall. Then, secure it to the wall with a nail gun. After it has firmly attached, paint the crown molding the same color as the cabinets. You can then fill in any holes with wood putty after you have completed this step. Once you are satisfied with the finish, apply two coats of interior paint, using two coats of primer.
Before you install crown molding, measure the ceiling’s height and width. If it is uneven, make sure the molding matches the height of the ceiling. The molding should be evenly spaced above the cabinet doors but not dominate the room. The crown molding should be installed at a height equal to that of the cabinet and ceiling.
Repainting and staining
Repainting or staining kitchen cabinetry is a great way to update the look of your kitchen without spending a lot of money. There are several benefits to staining, including its durability and ability to hide blemishes on wood. It can also hide cracks, uneven grain distribution, and color variations. Generally, light-colored cabinets can stain more easily, and they tend to hide dust and dirt better. Contrarily, dark cabinets are more susceptible to dust and require more maintenance.
Generally, stain is more expensive than paint, but it is still less expensive than replacement cabinets. Paint is a better option if you have a limited budget. Paint may require more coats to be applied correctly and may take longer to apply than stain. If you are looking to hire a professional to apply stain, you will need to spend more money.
It is recommended to use a stain-blocking primer if your cabinets have been stained heavily. A stain-blocking primer seals surface imperfections and dries quickly. You can choose from oil-based primers or 100 percent acrylic latex. The primer should be loaded into a paint tray and evenly applied. To apply primer to the surface, you can use a brush or roller.
There are many options for refacing and refinishing cabinets
Refacing or refinishing kitchen cabinets is one of the most affordable ways to update your kitchen. This involves removing existing cabinet parts and replacing them by new wood veneer or laminate. This new material is usually 1/4-inch thick and can be either wood grain or your favorite color. To give the room a fresh look, you will install the new cabinets.
Refacing or refinishing kitchen cabinets is a cheaper option than replacing them. However, it is still the most complete upgrade. This option will give your cabinets a new look but it won’t change their functionality or fix any issues. In addition, it will not solve the problems associated with damaged cabinets, which will require you to buy new ones. You may prefer white or cream cabinets for a traditional kitchen, but you can paint or reface your cabinets to achieve a modern look.
If you have cabinets doors that are not in good condition, you can refinish them. You can change the color and finish of your cabinet doors. You can also change the color of the wood to a solid color if you wish. You can refinish the cabinet doors to cover minor imperfections or wear, and update the kitchen without having to tear it down completely.
- About the Author
- Latest Posts
Introducing Ron, the home decor aficionado at ByRetreat, whose passion for creating beautiful and inviting spaces is at the heart of his work. With his deep knowledge of home decor and his innate sense of style, Ron brings a wealth of expertise and a keen eye for detail to the ByRetreat team.
Ron’s love for home decor goes beyond aesthetics; he understands that our surroundings play a significant role in our overall well-being and productivity. With this in mind, Ron is dedicated to transforming remote workspaces into havens of comfort, functionality, and beauty.
Beginners Guides
Ceiling Fans For Your Patio
Ceiling fans are a great addition to your patio. You can use these fans both indoors and outdoors. They are quiet and easy to install. These fans will help keep you cool and comfortable during the hot summer months. Regardless of the size of your patio, a fan can create a warm and cozy atmosphere.
Ceiling fans that can withstand water
When choosing a ceiling fan, it is important to choose one that can be used in damp areas. This will provide the greatest protection against moisture. Ceiling fans with wet ratings can be found in many finishes and designs. These ceiling fans are a wonderful addition to any indoor or outdoor area.
Trifecte Outdoor Ceiling fan is an excellent choice. It has a reversible motor that turns warm air into winter. The fan’s speed can be controlled via a voice-controlled app. Easy to install this outdoor ceiling fan.
Ceiling fans with a wet rating have better sealing and can be used where they are exposed. These ceiling fans can be used in outdoor spaces with no roofs such as patios.
They are also quieter
Outdoor ceiling fans have a quieter operation than indoor fans. However, they can be used outside on a patio, porch, or terrace. Noise level will be affected by the size and shape outdoor fans. For small spaces, fans with 52-inch blades work best. For larger outdoor spaces, fans with longer blades might be required. Outdoor ceiling fans must be waterproof- and damp-rated. High-end ceiling fans can be used to add decoration to your outdoor space. These ceiling fans’ motors and blades can be made of the same materials as indoor fans.
When selecting a ceiling fan, you should consider how big your patio is. Your patio will be noisy if the fan is too big. Large fans can increase airflow but are more loud. For larger areas, it is recommended that at least two ceiling fan be installed.
They are easy to install
Ceiling fans are great for increasing light and air circulation in your patio. You have two choices: low-voltage models that can be installed quickly or high-end, elegant models. Outdoor ceiling fans offer many benefits. It’s not only beautiful, but also practical.
It is important to select the right fan for your patio. You should look for one that has damp-proof motors and can withstand all weather conditions. It should also be able to withstand rain, ice, and salty ocean breezes. Choose one with a damp resistance rating to prevent rusting.
The most popular outdoor ceiling fans are those with five to four blades. A fan can have up to 15 blades. Too many blades can cause excessive wind.
These are easy to assemble
A ceiling fan can be a wonderful addition to your patio. You can easily assemble it and take it apart for cleaning and maintenance. These fixtures are simple to put together and great for DIY projects. There are many sizes and styles available. Many fixtures come with mounting brackets.
There are many choices for outdoor ceiling fan. There are models that resist rusting and humidity-related corrosion as well as models that match your style. Many models are simple to install and waterproof. These models are great for outdoor spaces.
Ceiling fans with outdoor blades typically have five to four blades. Some blades are stronger than others. The fan’s airflow depends on several factors such as blade pitch, blade span and distance from the floor. Smaller fans will work well in smaller spaces while larger fans may blow too much. Outdoor ceiling fans can circulate air over a greater area.
- About the Author
- Latest Posts
Introducing Charles, the Editor in Chief at ByRetreat, whose passion for interior design and editorial excellence elevates every remote workspace to new heights. With his keen eye for detail, impeccable taste, and expertise in design, Charles brings a wealth of knowledge and creativity to the ByRetreat team.
As the Editor in Chief of a renowned lifestyle blog, Charles has honed his skills in curating captivating content and staying up-to-date with the latest trends in interior design. His deep understanding of aesthetics and the power of storytelling through design enables him to create remote workspaces that are not only visually stunning but also rich in personality and meaning.
Beginners Guides
How Long Should Ceiling Fans Run?
If you have ever asked yourself about the ideal running time for your ceiling fan, the answer is eight hours. If you are planning to go out of town, feel free to leave the fan on for a longer period. Just remember to turn it off when you come back home to allow the motor to rest.
Ceiling fans of low quality
You want to make sure that you buy a ceiling fan made from high-quality materials. Low-quality fans are more likely to heat up and consume more electricity. These fans may not be as well-constructed as those of higher quality. Low-quality fans might have poor design or wiring.
The speed of the fan is also important. The fan will move more air if it is running at a higher speed. Lower speeds produce less noise.
Motors of low quality
The motor is one factor that will determine how long ceiling fans should run. Although DC motors are not as common today as they were in the 1970s, they still exist in high-end fans. Stack motors are motors that use two or more shafts. The fan motor has one shaft and the second is attached to it.
Ceiling fans with better motors will last more and offer better air circulation. But make sure you don’t place too much stress on your motor. To ensure adequate ventilation, they should be quieter and run at lower speeds. The pitch of the blades is another important aspect. The fan won’t last as long if the blades don’t move air properly if they aren’t angled correctly.
Blades of low quality
The longevity of a ceiling fan is directly affected by the quality of its blades. Materials used for blade construction are also important. Low-quality fans may cause the blades to warp and soften if they are not protected from moisture.
To avoid damage or warping, the blades must be properly tightened. The blades may wear out faster if they are not tightened properly. Also, poorly installed blades can cause structural problems.
Inefficient motors
The amount of air that the fans move determines the efficiency of ceiling fan. This is a measure of the fan’s overall performance. It is often expressed in m3/min/W. Inefficient motors use more energy to create the same amount as air movement as efficient fans.
The motor’s rated power is approximately seventy-four to eighty-six per cent. This power is needed to turn fan props. The fan speed will increase, which means that the power required to turn the props increases.
Overheating ceiling fans
A ceiling fan can heat up and become unbearably hot. This can cause serious damage to the machine and its internal components. Overheating is most commonly caused by dirty bearings, faulty wiring, or imbalanced blades. You should contact professionals if you suspect that your ceiling fan may be overheating.
Dust buildup on the blades is another common reason for overheating. Dust can build up in the vortex formed by airflow as the fan spins and become stuck in the bearings. The fan will draw more power and become more difficult to operate. It is therefore important to clean your ceiling fan regularly and get rid of any debris.
Ceiling fan maintenance costs
The power consumption of a ceiling fan will affect the cost. To calculate the electricity consumption for a specific fan, multiply the wattage with hours. Electricity is usually charged by the kilowatt hour (kWh) in most states. This will give you an estimate for how much electricity your ceiling fans will consume over a given time period. Hawaii has the highest electricity tariff while Washington and Louisiana have both the lowest. These states have a 9.6 kWh cost for a ceiling fan.
Although it is not a significant portion of your monthly energy bill, the cost of running a ceiling fans can be a substantial part of it. If the ceiling fan is not turned off, it can add about five dollars to your monthly electric bill. The cost of four ceiling fans can add up to $25 per month.
- About the Author
- Latest Posts
Introducing Charles, the Editor in Chief at ByRetreat, whose passion for interior design and editorial excellence elevates every remote workspace to new heights. With his keen eye for detail, impeccable taste, and expertise in design, Charles brings a wealth of knowledge and creativity to the ByRetreat team.
As the Editor in Chief of a renowned lifestyle blog, Charles has honed his skills in curating captivating content and staying up-to-date with the latest trends in interior design. His deep understanding of aesthetics and the power of storytelling through design enables him to create remote workspaces that are not only visually stunning but also rich in personality and meaning.
Beginners Guides
Can You Use a Ceiling Fan Instead of a Range Hood?
If you are on a tight budget, consider using a ceiling fan instead of a range hood. Ceiling fans provide similar cooling benefits without the noise or mess associated with range hoods. While ceiling fans may be less expensive than range hoods, it is important to consider their design and noise levels before making a purchase.
Selecting a range of hoods
Before you can choose the right range hood with ceiling fan, it is important to determine how much space it will take up. The hood’s size can be determined by measuring the area between the cabinets and the cooking surface. You should also decide how high you want the hood. The size of your kitchen ventilation system is critical.
The range hood’s style and material should be in harmony with your kitchen design. It is important to choose an easy-to-clean product. You should look for one with a fully enclosed bottom and easy-to-remove filters. Also, look out for integrated buttons and heat sensors, as well as a powerful motor. You should also consider the style and color of your kitchen in relation to it.
You may consider switching to a lower-efficiency model if the range hood’s noise level is too loud for you. Low-efficiency models will produce a loud exhaust sound, which can prevent you from using them. You can test it in a showroom if you aren’t sure of the sound level. The quieter models will be those with lower decibels.
Choose a ceiling fan over a range hood
Consider your cooking style when choosing between a ceiling fan and a rangehood. Consider factors like the CFM (cubic feet of airflow per minute), fan speed, and noise level. CFM is a measure of how fast the fan will vent. A fan that has two speeds and emits a level of noise that corresponds to your preferred level is a good choice.
It is usually easier to install a range hood in a single-family home than it is in an apartment. Apartment buildings often don’t have access to the outdoors. An external range hood would not work efficiently without a vent. Some condos and historic buildings may not allow for their installation. You should instead install a ceiling fan in such instances.
A ducted rangehood can be a great choice if you already have a kitchen duct system. The ductless hood can be programmed to turn the hood on or off as needed. It is also more flexible because it doesn’t attach to your kitchen ceiling. Ductless models can produce higher decibel levels and require more fan power.
Choose a ductless rangehood
Ductless range hoods offer many advantages over traditional designs when it comes to selecting a range hood. These models don’t use ducts, and instead recirculate the air through charcoal filters. This type of hood is also simpler to install. The old hood can be removed from the wall and the wires connected to it can then be attached to the new one. To secure the unit, you can use drywall anchors.
Ductless rangehoods are usually made from stainless steel or aluminium. These materials are typically more expensive than plastic. These filters can also be used to filter different materials, like aluminum and charcoal. Although charcoal filters are more effective at collecting smoke and particles, they will need to be replaced every three to six month.
There are many styles and sizes of ductless range hoods. The Broan 413004 is an excellent range hood. However, the Cosmo 5MU30 is sleek and extremely efficient.
Wall-mounted range hoods
When choosing a wall-mounted rangehood, there are many things you should consider. Noise level is the first. These appliances can be very loud when they are in use. The decibels are used to measure the noise level. 60 decibels is the noise level for a normal conversation at 3 feet. You might choose a hood with less noise depending on what type of cooking you do and how big your kitchen is.
The size of the range hood that you choose for your wall mount is another important consideration. The hood should be the right size for the space. It will be difficult for the hood to fit over the stove if it is too small. The hood should cover at least half of the cooking surface.
A wall-mounted rangehood’s CFM rating (cubic feet per minute) is another important aspect. A machine with a high CFM rating will be able to remove most of the cooking smells and heat.
- About the Author
- Latest Posts
Introducing Ron, the home decor aficionado at ByRetreat, whose passion for creating beautiful and inviting spaces is at the heart of his work. With his deep knowledge of home decor and his innate sense of style, Ron brings a wealth of expertise and a keen eye for detail to the ByRetreat team.
Ron’s love for home decor goes beyond aesthetics; he understands that our surroundings play a significant role in our overall well-being and productivity. With this in mind, Ron is dedicated to transforming remote workspaces into havens of comfort, functionality, and beauty.
-
Vetted3 days ago
15 Best Boxwood Varieties for Thriving in Full Sunlight
-
Vetted6 days ago
15 Best Ways to Label Clothes for Nursing Home Residents – Stay Organized and Efficient
-
Vetted4 days ago
15 Best Dryer Vent Hoses to Keep Your Laundry Room Safe and Efficient
-
Vetted4 days ago
15 Best Spider Sprays to Keep Your Home Arachnid-Free
-
Vetted3 days ago
14 Best Cleaners for Aluminum Surfaces – Shine Bright Like a Diamond
-
Vetted4 days ago
15 Best Nightstand Charging Stations to Keep Your Devices Organized and Ready to Go
-
Beginners Guides2 days ago
How to Slow Down My Ceiling Fan to Reduce Wind Chill
-
Beginners Guides17 hours ago
Can You Use a Ceiling Fan Instead of a Range Hood?