How to Reupholster a Chair With Buttons

  • By: Ron
  • Date: October 21, 2022
  • Time to read: 3 min.

how to reupholster a chair with buttons

You can now reupholster a chair using tufted buttons after removing the old upholstery. Firstly, you will need to remove the metal ply grip and change the fabric. This article will demonstrate how to reupholster an armchair with buttons using the right tools.

Change the fabric

Changing the fabric of a chair with buttoned upholstery adds a touch of elegance to any room. The buttons on a chair give the chair a curved look and a different feel. Buttons are easy to attach to chairs and cushions. You only need a few tools. First, remove the old upholstery from your chair’s frame. Next, cut the new fabric. You can use the template from the old fabric.

Changing the fabric of a chair with buttoned upholstery is relatively simple. You just need to make sure you take good care of the fabric pieces you remove. Taking care of these pieces will make the reupholstering process much easier. Before you begin cutting new fabric, label any pieces you take out. If the fabric pieces are sewn together, you’ll need to use a seam ripper to remove them.

You can reuse fabric that is very old if you are able to. Just make sure it is not much darker than the new fabric. Afterwards, you can use the old batting as a guide to cut the fabric.

removing old upholstery

First, remove any old fabric from a chair that has buttons to replace it. To do this, use a vacuum attachment. Next, measure the fabric to determine its size and cut it to fit. Cut it carefully so as not to damage the wood underneath. Place the new fabric on top of the chair. Make sure it is slightly overlapped. As needed, you can smoothen the fabric with sandpaper.

The second step is to cut the fabric into pattern pieces. This will be very important for reupholstering the chair, since the old fabric will be used as a pattern. Be sure to remove all staples, as they are usually embedded deep into the wooden frame.

Next, remove any staples that are holding the fabric together. To remove stubborn staples, use a flat-head screwdriver or needle-nosepliers. Also, use tack pullers to remove the tacks holding the buttons in place. This will allow you inspect the layers beneath the upholstery.

removing metal ply grip

You can use a pair of pliers to remove the metal ply grip that is holding the buttons to the chair. First, remove the fabric covering the metal plygrip. This piece of fabric is usually made of cotton or dacron. Next, remove the staples that keep it in place. After this is done, you can access the burlap webbing which holds the buttons taut.

Reupholstering a tufted accent chairs

If your tufted accent chair has buttons, you might be wondering how to reupholster it. There are a few things you should remember. First, you will need the upholstery to be removed. First, you need to find out the exact placement of the buttons. To replace the button, measure its depth. Next, cut the fabric to a 1 inch wider on all sides and staple it to the back of the frame.

The next step is to support the seat back with burlap, cardboard, webbing, and padding. An upholstery needle is required. You can buy it at your local store or online. After that, push the needle through the back of the chair, and then thread the upholstery thread through the button. If the chair does not have buttons, you can use the upholstery needle to create a knot, or you can simply use a regular needle.

After you’ve pinned the button in place, you can now apply the fabric to the back of the chair. To cover the button snugly, you can use twine or strong nylon buttons twine. Place staples around the chair’s back once the chair has been covered. To ensure that the fabric fits snugly, use a lot of staples. You can then reassemble the chair. Afterward, you can use fabric glue to secure any excess fabric.

Previous Post

How to Reupholster a Wingback Chair

Next Post

How to Reupholster a Chair – For Beginners